Logo Allmyblog
Logo Allmyblog
Lien de l'article    


Contacter l'auteur de ce blog

- car

- OBDSTAR X300 DP/DP PLUS/X300 Pro3 new update (14/12/2018)
- How To Activation And Update Autek IKey820 key programmer
- How to make X431 HD work in the Android device without X431pad?
- How does Ktag KTM100 work with Mercedes ME9.7 ECU and Renew Cable?
- http://blog.obd2eshop.com/bmw-e46-srs-light-on-reset-using-creator-c310/

<< Décembre >>

Ajouter careucar123 à vos favoris

- Launch X431
 OBDSTAR X300 DP PLUS Test Report – A Lot of Videos Alerter l'administrateur Recommander à un ami Lien de l'article 

OBDSTAR X300 DP PLUS:  http://www.obd2eshop.com/wholesale/obdstar-x300-dp-plus-x300-dp2-full-key-programmer.html


OBDSTAR X300 DP Plus GM Opel Bosch BCM Clone OBDSTAR X300 DP Plus read 2008 BMW 5 Series DME ISN Pincode OBDSTAR X300 DP Plus Benz A class W169 Cluster Calibration OBDSTAR X300 DP Plus Do BWM EGS Programming for 8HP OBDSTAR X300 DP Plus Do 2015 VW Sagitar Cluster Calibration OBDSTAR X300 DP Plus Program Key for 2016 Renault Duster OBDSTAR X300 DP PLUS Key Master DP Plus Do BMW FEM Key Programming OBDSTAR X300 DP PLUS Do VW NEC 24C64 Dashboard All Keys Lost Programming 201406 OBDSTAR X300 DP PLUS Program 2016 Toyota Type 5 All Smart keys Lost How to use obdstar X300 DP plus read pincode on Hyundai 47 smart card


  Aucun commentaire | Ecrire un nouveau commentaire Posté le 26-09-2018 à 03h57

 BMW CAS Key programmer vvdi prog cheap alternative Alerter l'administrateur Recommander à un ami Lien de l'article 

Looking for BMW key programmer for cas1-3+, and better can be done from obd and dump for cas reading dumps. VVDI Pro and VVDI2 is sure to work, but a bit pricy, any alternative?

vvdi prog cheap alternatives:
extremely fast for cas1, 2 & 3
for cas3+ if need downgrade 10 minutes and seems safe.
make sure you have proper power on the car
cas4 F10 – ok (new key)
cas4+ F10 – ok (new key) isn from org key or dump DME
fem/bdc F31 – ok – reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key
Did a 2008 E60 CAS3+ had to DOWNGRADE it took about 10min and programmed key successfully
Cas4 can only be done by reading DFlash from Freescale cpu then load into programmer software and generate key. It can no ne done by obd.
You need xprog or vvdi prog to read the dflash.

  1. BMW Multi tool
I use multi tool to downgrade the CAS on table by CAS plug and 12V, then i make key, downgrade process takes 30 min, making key takes 1 minutes the whole job is 31 min without opening the CAS.

I can do CAS4 all key lost as well with Multi tool, but u need the help of a DME, 10000% Success, job done on table, ADD key by OBD. I m using Dialprog, done 1 all key lost and 3 add key , not a lot of testing but so far so good.

  1. Autohex2
It is a indisputable fact.

  1. Lonsdor K518ISE
A multi brand key maker which can update cas latest by obd.
Work for me too… Add e91 cas3+ my07, cas2 e91 my06.
e90 2007 Europe car 868Mhz by obd ok

  1. VVDI2 BMW cas3 price 1100, bmw explorer + hitag =2100 eur and new AH4 lite version 1950 eur. I think better to add 1000 and buy good tool.

Therefore, it seems that no alternatives, you can go with vvdi prog + VVDI2.

  Aucun commentaire | Ecrire un nouveau commentaire Posté le 29-09-2018 à 05h13

 K+DCAN usb for 545 e60 2005 programming and coding results Alerter l'administrateur Recommander à un ami Lien de l'article 

I can show you my programming and coding results few day before for my 545 e60 2005..with K DCAN usb...
Requirements for installation of ISTA P : min 200 gb free hdd,min 3-4gb RAM,and min 2ghz cpu speed,i hope you know...
I don't know for sure do you need to keep ISTA +,because I have installed Ista + before ISTA P version which I have...
I don't remember thru that installation of ISTA P that I was needed some kind of activation key, only reg fix or something ...but anyway, now I have a new version of ISTA P3.65.0.500 so you can go thru installation of version [85 gb]...[there is ISTA P loader folder with activation key ]
About my experience, I must tell you that with K DCAN usb cable everything was fine but slow...
For my CCC Application programming time was about 8 hours!!!
Everything else was much faster,  think I have 38 ecu programmed and coded thru ISTA P....
I have done full car programming in about 12 hours!!!
Yes I know it is crazy, but when it started, I must to finish everything...
BMW ICOM is much better[and faster] solution!
But for my car it was a problem for old ZSUB numbers which I did not managed to program
all ecu-s thru WinKFP ,one by one..only few of them.
Everything about ecu-s in my bmw was from 2005 [integration level plant E060-04-09-550]
Anyway I think there is no problem for programming 1 ecu with K DCAN usb, but keep in mind that voltage of the battery must be backup all the time and key must be on ignition position ...

And one more thing, for me WinKFP is also good solution for programming, because when you have new ZSUB numbers {ecu numbers} ,you just need to find that number in AIF thru INPA, and after that you just in WInKFP comfort mode [F1] ,put that number [F1],enter VIN [F4],than DONE[F8] and than [F3] again and everything is done!
Or just update ecu with [F3],than select ecu family,enter VIN [F4],than [F8] and again [F3]...
I hope you don't mind for this long thread, and also sorry for my English writing ,because I don't know better...
PS:ISTA P is only for programming and coding ,not for diagnostic....so keep your ISTA +
BMW E60 ISTA /P final report:



  Aucun commentaire | Ecrire un nouveau commentaire Posté le 30-09-2018 à 09h26

 Nexiq 2 Usb link driver 8.x China free download Alerter l'administrateur Recommander à un ami Lien de l'article 

To handle heavy trucks (mostly Cummins, Caterpillar, Mercedes etc), the Nexiq is an good solution. However when you receive the package and if the driver is lost, then google and search a working driver is a good idea.

Nexiq 2 Usb link driver 8.x China free download:

Nexiq 2 USB link is tested to work with Cummins Insite 8.2.0, for the procedure, you can watch this Youtube Video: 

Cummins Insite 8.2.0 (tested):

Where to buy good clone of Nexiq Usb Link 2?
Here a good place to get Nexiq USB Link2 at good price:
Cummins Insite 8.2.0

As you can see, the package contains all what you want incl. main unit, adapters, cables, USB cable and CD.

Package including:
1pc x NEXIQ-2 usb-link  main interface
1pc x 441013 OBD II Adapter
1pc x 444009 J1962 OBD II Adapter
1pc x 402048 6- and 9-pin Deutsch Adapter
1pc x 442022 Volvo 14-Pin Adapter
1pc x 442020 Volvo 8-Pin Adapter
1pc x 442021 Komatsu 12-pin Adapter
1pc x 448015 CAT 9-Pin Adapter
1pc x 441033 3-pin Deutsch Adapter(with male and female connector)
1pc x USB cable
4pc x CD

  Aucun commentaire | Ecrire un nouveau commentaire Posté le 11-10-2018 à 09h12

 Which tool for full-system scan + special functions + IMMO? Alerter l'administrateur Recommander à un ami Lien de l'article 

Looking for full diagnostic for all brands.. service resets-electronic brake reset etc, Also it is good if we can have access on immobilizer to program ECU or keys. Which tool better? any experience?

I have Auro OtoSys IM600. but OtoSys im100 is good to just small screen. im 100 and maxisys are sister companies. im 100 use same diagnostic software as maxisys but OtoSys IM600 & IM100 have immo functions as well.

Quote the comparison table between Auro OtoSys IM600 & OtoSys im100:
Incl. IMMO, Programming, diagnostics, service functions, features.
im100-vs-im600-immo-01 im100-vs-im600-immo-02 im100-vs-im600-immo-03 im100-vs-im600-immo-04 im100-vs-im600-immo-05 

Seeing is believing, here some real images:  
im100-vs-im600-04 im100-vs-im600-05
E-mail: sales@OBD2eShop.com
         Hot line: +8618054815707
 Whats app:+8618054815707
 Skype: OBD2eShop.com


  Aucun commentaire | Ecrire un nouveau commentaire Posté le 16-10-2018 à 11h34

|<< <<<  61   62   63   64   65  | 66 |  67   68   69   70   71  >>> >>|

Fil RSS 2.0
Ajouter à NetVibes
Ajouter à Google
Ajouter à Yahoo
Ajouter à Bloglines
Ajouter à Technorati

Allzic en direct

Liens Commerciaux
L'information à Lyon
Retrouvez toute l'actu lyonnaise 24/24h 7/7j !

L'information à Annecy
Retrouvez toute l'actu d'Annecy 24/24h 7/7j !

L'information à Grenoble
Retrouvez toute l'actu de Grenoble 24/24h 7/7j !

Application Restaurant
Restaurateurs, demandez un devis pour votre application iPhone

Fete des Lumières
Fête des lumières : vente de luminaires, lampes, ampoules, etc.

Acheter un diffuseur d'huiles essentielles

Votre publicité ici ?
  Blog créé le 29-11-2012 à 10h32 | Mis à jour le 14-12-2018 à 08h15 | Note : Pas de note