To handle heavy trucks (mostly Cummins, Caterpillar, Mercedes etc), the Nexiq is an good solution. However when you receive the package and if the driver is lost, then google and search a working driver is a good idea.
As you can see, the package contains all what you want incl. main unit, adapters, cables, USB cable and CD.
1pc x NEXIQ-2 usb-link main interface
1pc x 441013 OBD II Adapter
1pc x 444009 J1962 OBD II Adapter
1pc x 402048 6- and 9-pin Deutsch Adapter
1pc x 442022 Volvo 14-Pin Adapter
1pc x 442020 Volvo 8-Pin Adapter
1pc x 442021 Komatsu 12-pin Adapter
1pc x 448015 CAT 9-Pin Adapter
1pc x 441033 3-pin Deutsch Adapter(with male and female connector)
1pc x USB cable
4pc x CD
Ford GK29-14B321-AC added wiring diagram
Great Wall 3658110XKR02A added data
Mazda KD5H-57K30 correct CPU model, wiring diagram and data
CG100-UniProg, added support chip
NEC R7F7010 20
CG100-UniProg, the following chips added BOOT storage area
CG100-UniProg, the following chips added CONFIG storage area
CG100-UniProg, the following chips added OPBT0 storage area
Part2: How to upgrade Lonsdor K518ise adapter kernel
Part1: How to Bind Lonsdor K518ISE KPROG Adapter
The Lonsdor K518ISE KPROG adapter is specialized for part of Volvo car series and the new Maserati
for the time being, the more car models supported will keep updating. And the KPROG adapter must be bound to K518ISE before using, So how to blind K518ise KPROG adapter? Please follow the 5 steps below:
Step 1. Connect adapter to K518ISE with mainline
Step 2. Connect K518ISE with 12V power supply
Step 3. Enter into “Setting”
Step 4. Click “Bind adapter”
Step 5. Click “OK” to complete
After Bind KPROG adapter, you can use K518ise to do key programming.
Part2:How to upgrade Lonsdor K518ise adapter kernel
After the APK of K518ise device is upgraded to V1.6.0 version, the KPROG adapter requires to be installed new kernel beforehand. Please refer to below operations.
Step 1: Connect the device to the specified adaptor and plug in 12V power, as shown below.
Step 2 : Start up the device, and input password to enter home screen. Click “Update firmware” button in below red box.
Step 3: The following interface appears, click “Install Adaptor” in below red box.
Step 4: It skips to the below interface, click “OK” to continue.
Step 5: It skips to below interface. You will see the progress indicator moving rightwards. When downloading is completed, click OK” and exit. The adaptor kernel is installed successfully.
1- Updates will no longer remain for free, a payable subscription fee will be implemented within the next 3 months from today, cost details not disclosed yet
2- No more vehicles brand Logos display, due to legal intellectual copyright issues.
3-Renault come back and some new china car brands and some fix bug + vw 3.5 skoda menu etc. you can update and check it
new update change logo